verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X100FTC

The AirTAC SE50 Standard Cylinder SE50X100FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke100 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$90.69 $98.19Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X100FTC

The AirTAC SE50X100FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. It features a 50 mm bore, a 100 mm stroke, and an integrated FTC center trunnion mounting interface. The extruded aluminum barrel omits external tie rods entirely, yielding a compact, corrosion-resistant profile that mounts flush against machine frames while exposing standardized sensor grooves on three sides.

Field-adjustable pneumatic cushioning at both end caps allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling. This specific SKU lacks the -S magnet option, meaning it is not equipped for AirTAC CMSE or DMSE position sensing out of the box. The 30 mm cushion length and M16x1.5 rod thread provide robust energy absorption and load attachment for mid-range actuation tasks.

Airtac SE50 Standard Cylinder SE50X100FTC Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X100FTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke100 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X100FTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X100FTC Is Used

packaging

Carton Erector Pusher

Drives the folding mechanism on continuous-motion packaging lines, utilizing the 982 N push at 0.5 MPa to reliably erect and square cardboard cartons at cycling speeds up to 800 mm/s.

conveyor_belt

Pallet Diverter Gate

Actuates a pivoting flow-control gate using the FTC center trunnion mount to handle accumulated pallets, relying on the adjustable air cushion to soften end-of-stroke impacts during heavy diverting.

straighten

Metal Stamping Ejector

Kicks formed sheet metal parts out of progressive die stations, where the 825 N pull force safely retracts the 20 mm rod and the tie-rod-free extruded barrel resists shop-floor coolant spray.

Is the Airtac SE50 Standard Cylinder SE50X100FTC the Right Cylinder?

Selecting this 50 mm bore makes sense when your application requires the 982 N push at 0.5 MPa (or 1374 N at 0.7 MPa) but the 628 N push of a 40 mm bore is insufficient. If your load demands higher thrust, stepping up to the 63 mm bore yields 1559 N at 0.5 MPa. The integrated FTC mount provides a fixed center trunnion for pivoting loads, but remember that a standard double-acting cylinder relies on live air pressure to maintain position; if air is lost, the piston will drift and cannot hold a load without an external pilot-operated check valve or a BSE rod lock variant. Because this is a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, matching the 50 mm bore, 100 mm stroke, PT1/4 port, and FTC mounting footprint exactly.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X100FTC FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 cylinders with a 50 mm bore, 100 mm stroke, and FTC mount. However, this specific SKU lacks the built-in magnet (-S), so it cannot support AirTAC CMSE or DMSE electronic sensors without modifying the piston assembly.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X100FTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X100FTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.