
The AirTAC SE50 Standard Cylinder SE50X100SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X100SFA is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Equipped with a built-in magnet, it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames.
This 50 mm bore unit features a 100 mm stroke and utilizes a PT1/4 port paired with a 20 mm diameter piston rod. Field-adjustable air cushions at both ends allow technicians to tailor end-stop deceleration, effectively softening impacts when cycling at speeds up to 800 mm/s. The included FA front flange accessory provides rigid axial mounting, anchoring the cylinder securely for heavy thrust applications.
| Model | Airtac SE50 Standard Cylinder SE50X100SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on automated box-erecting lines, utilizing the 982 N push force to reliably break and fold corrugated board scores at high cycle rates.
Pivots sorting gates on parcel handling conveyors, where the 100 mm stroke provides rapid lateral displacement and the FA flange ensures rigid structural support against side impacts.
Actuates material guides and hold-downs in metal stamping feed lines, using the adjustable pneumatic cushions to gently decelerate the 20 mm rod at high transit speeds.
Delivering 982 N of thrust at 0.5 MPa, this 50 mm bore is an optimal mid-range actuator. If your assembly requires less force, stepping down to the 40 mm bore yields 628 N of push, whereas upgrading to the 63 mm bore provides 1559 N for heavier payloads. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift. For applications requiring true load holding without continuous pressure, consider the BSE rod-lock variant.
Because this model carries the FA front flange mounting code, it is configured for rigid face-mounting directly to your fixture. The built-in -S magnet is fully compatible with CMSE and DMSE switches, dropping directly into the three-sided sensor grooves. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any matching ISO 15552 footprint, sharing standardized mounting hardware and dimensions.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X100SFA is dimensionally interchangeable per ISO 15552 standards. Its square extruded profile barrel and standard FA front flange interface allow it to serve as a direct replacement for other ISO 15552 profile cylinders without modifying existing mounting holes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.