Airtac SE50 Standard Cylinder SE50X150CBCR
The AirTAC SE50 Standard Cylinder SE50X150CBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke150 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50X150CBCR
The AirTAC SE50X150CBCR is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa and a 1374 N push at 0.7 MPa. Built with a clean, extruded aluminum barrel that eliminates external tie rods, this 50 mm bore unit resists corrosion and mounts flush against machine frames, saving valuable space in tight assemblies.
This 150 mm stroke model includes a CB double clevis mounting accessory for pivoting motion and features field-adjustable air cushions at both ends to soften hard end-stops during 30-800 mm/s cycling. Please note this specific SKU lacks a built-in position magnet, so it cannot host CMSE or DMSE electronic sensors without modification.
Airtac SE50 Standard Cylinder SE50X150CBCR Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X150CBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X150CBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X150CBCR Is Used
Package Sorting Diverter
Uses the 982 N push force and CB double clevis to pivot routing gates on high-speed logistics conveyor lines, smoothly decelerating the 150 mm stroke via adjustable cushions.
Case Erector Forming Arm
Folds cardboard carton blanks during automated packaging runs, relying on the 50 mm bore's 825 N pull force to retract the forming arm reliably at cycling speeds up to 800 mm/s.
Textile Tenter Frame Guide
Pivots a fabric guide linkage on a textile finishing machine, where the ISO 15552 square profile allows flush mounting in narrow gantries and the CB clevis handles angular articulation.
Is the Airtac SE50 Standard Cylinder SE50X150CBCR the Right Cylinder?
If your pivot mechanism requires less force, stepping down to the 40 mm bore yields a 628 N push at 0.5 MPa, whereas upgrading to the 63 mm bore provides a 1559 N push for heavier loads. Because this is a plain double-acting cylinder, it will drift and cannot hold a vertical load if air pressure drops or the valve centers; for position-holding safety, consider an AirTAC BSE rod lock variant. The standardized ISO 15552 mounting dimensions ensure this CB clevis cylinder is a direct retrofit for other ISO 15552 profile cylinders, using a PT1/4 port and a Ø20 mm hard-chrome rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X150CBCR FAQ
This 50 mm bore cylinder provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push increases to 1374 N, with a maximum push of 200 kgf at 1.0 MPa. It features a PT1/4 port and an M16x1.5 rod-end thread.
No, the adjustable air cushions at both ends only decelerate the piston near the stroke limits and do not act as a brake. If unpowered or exhausted, the rod will drift. For secure mid-stroke holding, an external pilot-operated check valve or an AirTAC BSE rod lock cylinder is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X150CBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.