
The AirTAC SE50 Standard Cylinder SE50X280 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X280 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush and resists corrosion in demanding industrial environments.
This 50 mm bore unit operates at speeds from 30-800 mm/s and relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston near stroke end, softening hard mechanical stops. Because this specific SKU lacks the built-in magnet suffix, it does not support direct CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X280 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 982 N push force and 280 mm stroke to reliably actuate routing gates on high-speed beverage packaging conveyors.
Leverages the adjustable end cushions to smoothly fold heavy cardboard flaps without crushing the box structure.
Employs the 280 mm stroke to position medium-density fiberboard panels accurately against a straight fence for downstream cutting.
Selecting the SE50X280 is ideal when your application requires roughly 1000 N of thrust at 0.5 MPa. If your load is lighter, you can step down to the 40 mm bore, which provides 628 N of push at 0.5 MPa. For heavier demands, stepping up to the 63 mm bore yields 1559 N of push at 0.5 MPa.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using the same 50 mm bore, 280 mm stroke, PT1/4 port, and mounting accessories. Since the stroke is 280 mm, the extended rod is subject to bending under side loads; an external guide mechanism is recommended to prevent rod-bearing wear. Note that a plain SE cylinder drifts when air pressure is lost or exhausted—it cannot hold a load without live pressure, so a BSE rod lock is required for secure positioning.
Quick checklist
The SE50X280 generates a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N, with an absolute maximum push of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa and runs at speeds of 30-800 mm/s.
Yes, its square extruded profile is dimensionally interchangeable per ISO 15552, allowing it to serve as a direct replacement for other ISO 15552 cylinders. However, it cannot hold a load when air is lost; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.