
The AirTAC SE50 Standard Cylinder SE50X320 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 320mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X320 is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It delivers 982 N of push force and 825 N of pull force at 0.5 MPa, making it well-suited for mid-range automation tasks. The square extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant body that mounts flush against machine frames.
This 320 mm stroke unit features a PT1/4 port, a 20 mm hard-chrome plated rod, and an M16x1.5 rod-end thread. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for fast-moving loads. This specific SKU does not include a built-in magnet, so it will not support CMSE or DMSE position sensors without modification.
| Model | Airtac SE50 Standard Cylinder SE50X320 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 320 mm stroke to extend a diverter arm, guiding heavy pallets onto a secondary packaging line with 982 N of push force.
Opens and closes machine tool safety doors, relying on the adjustable air cushions to soften the impact at both stroke ends.
Lowers inverted beverage bottles over a spray manifold, taking advantage of the no-tie-rod extruded profile for easy washdown.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your application requires less force, stepping down to the 40 mm bore yields 628 N. If you need more thrust, stepping up to the 63 mm bore provides 1559 N. Because this is a standard 320 mm stroke, it is a direct, dimensionally interchangeable direct replacement for any equipment adhering to the ISO 15552 mounting interface.
Since the stroke is 320 mm, the 20 mm rod and bearing are subject to increased bending moments under heavy side loads; utilizing an external guide rail is recommended to prevent premature wear. Note that a standard SE cylinder does not hold its position if air pressure is lost or the valve is centered—the piston will drift. For fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X320 provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. Its operating speed range is 30-800 mm/s.
Yes. The SE50X320 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders using the same 50 mm bore and 320 mm stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.