
The AirTAC SE50 Standard Cylinder SE50X40 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X40 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, high-cycle tasks. It generates 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, utilizing a 50 mm bore and a 40 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes.
This specific SKU lacks the built-in magnet option (-S), meaning it operates without electronic or reed position sensing. Field-adjustable pneumatic cushioning at both ends allows you to dial in end-of-stroke deceleration via a set screw, protecting the internal mechanics during rapid 30-800 mm/s cycling.
| Model | Airtac SE50 Standard Cylinder SE50X40 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the short 40 mm stroke mechanism to fold end flaps on corrugated packaging lines, utilizing the 982 N push force to crease heavy cardboard cleanly.
Actuates a routing gate at 30-800 mm/s to sort glass or PET bottles on a filling conveyor, benefiting from the flush profile barrel that resists washdown moisture.
Presses small bronze bushings into aluminum housings on an automated machining cell, relying on the adjustable end cushions to prevent impact damage at the 40 mm stroke limit.
Selecting this 50 mm bore is ideal when you need roughly 982 N of push at 0.5 MPa but want to avoid the physical bulk of larger units. If your application requires less force, stepping down to the 40 mm bore yields 628 N of push, whereas stepping up to the 63 mm bore provides a substantial 1559 N. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring strict load holding without live pressure should utilize an external pilot-operated check valve or the BSE rod-lock variant. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other 50 mm bore, 40 mm stroke profile cylinders utilizing PT1/4 ports and standard mounting hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X40 provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push capacity is 200 kgf at 1.0 MPa, and the operational speed ranges from 30-800 mm/s.
Yes, the SE50X40 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders with a 50 mm bore, 40 mm stroke, PT1/4 ports, and standard mounting accessories. Note that this specific SKU does not have a position-sensing magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.