
The AirTAC SE50 Standard Cylinder SE50X425 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X425 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a screw, softening hard mechanical impacts during high-speed cycling. This specific SKU is configured without a built-in magnet, meaning it does not support direct CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X425 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push at 0.5 MPa to divert heavy wooden pallets across roller conveyors in logistics distribution hubs.
Extends 425 mm to fold and seal corrugated cardboard carton flaps in continuous-flow packaging lines.
Actuates a 50 mm bore mechanism to open and close safety gates on injection molding machinery.
If your application requires less energy, stepping down to a 40 mm bore yields 628 N of push at 0.5 MPa, whereas scaling up to a 63 mm bore provides 1559 N for heavier loads. Because this 425 mm stroke creates a long unsupported rod extension, external guide rails should be installed to prevent rod-bearing bending under lateral stress. As a standard double-acting cylinder, this SE model will drift if air pressure is lost or a valve is centered; if your process demands static position holding without live pressure, integrate an external pilot-operated check valve or specify a BSE rod-lock variant. For a direct replacement, ensure the 50 mm bore, 425 mm stroke, PT1/4 port, and appropriate mounting accessory match your existing footprint.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force reaches 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X425 is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting footprints and can replace other ISO 15552 profile cylinders. Note that this specific SKU lacks a built-in magnet for CMSE or DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.