
The AirTAC SE50 Standard Cylinder SE50X425S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X425S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that drops directly into standardized ISO 15552 mounting interfaces. The integrated -S magnet enables seamless position detection with AirTAC CMSE (reed) and DMSE (electronic) sensors.
Equipped with a 425 mm stroke and a Ø20 mm rod, this 50 mm bore unit utilizes a PT1/4 port and operates at speeds from 30-800 mm/s. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling. The cushion is a deceleration feature only and does not lock the load.
| Model | Airtac SE50 Standard Cylinder SE50X425S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing gate on a 12000 BPH beverage line, using the 982 N push force to deflect PET bottles into labeling lanes over the 425 mm stroke.
Folds corrugated cardboard carton blanks during continuous packaging operations, relying on the adjustable cushion to soften the 425 mm extension stop.
Positions a backgauge stop for sheet metal bending, where the magnetic piston triggers DMSE sensors to confirm the 425 mm gauge depth before clamping.
This SE50X425S provides 982 N push at 0.5 MPa, sitting comfortably between the 40 mm bore (628 N push) and the 63 mm bore (1559 N push) for stepping up or down your force requirements. Because the 425 mm stroke creates a long unsupported rod extension, side-loading poses a risk of bending the rod bearing; an external guide is strongly recommended to prevent premature wear. For position feedback, pair the built-in magnet with CMSE or DMSE sensors, and ensure your hardware matches the ISO 15552 footprint. Remember that a standard SE cylinder drifts when air is lost—use a BSE rod lock variant if the application must hold a load safely without live pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X425S has a 50 mm bore and a 425 mm stroke. At 0.5 MPa it provides 982 N of push force and 825 N of pull force. At 0.7 MPa the push force is 1374 N, and the maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X425S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing ISO 15552 mounting hardware. It uses a PT1/4 port and includes a built-in magnet for CMSE and DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.