
The AirTAC SE50 Standard Cylinder SE50X45 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X45 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 50mm bore and a 45mm non-standard stroke. It delivers a robust 982 N of push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides.
This unit features field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, ensuring smooth stops without harsh impacts. This specific SKU is configured without a built-in magnet, meaning it does not support direct CMSE or DMSE position sensing out of the box. With a PT1/4 port and a 20mm hard-chrome rod, it operates reliably at speeds between 30 and 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X45 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 45mm stroke to fold corrugated cardboard flaps rapidly, leveraging the 982 N push force to crease heavy packaging materials without stalling.
Applies precise thrust to seat small bearings into housings, relying on the adjustable end cushions to prevent impact damage at the 45mm travel limit.
Powers a short-stroke routing gate on a sorting line, where the extruded profile cylinder mounts flush to the conveyor frame to save space.
When sizing this actuator, consider stepping down to a 40mm bore if your load requires less power, which provides 628 N of push at 0.5 MPa. If your application demands greater thrust, upgrading to the 63mm bore yields 1559 N of push at 0.5 MPa. Because this is a 45mm non-standard stroke, expect a made-to-order lead time for the exact travel distance.
As a standard double-acting cylinder, the SE50X45 will drift if air pressure is lost or a valve is centered, so it cannot inherently hold a load without live pressure; for fail-safe holding, consider the BSE rod-lock variant. For direct retrofits, this model is dimensionally interchangeable per ISO 15552 standards, utilizing a PT1/4 port and standard mounting accessories.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X45 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and body dimensions of other standard profile cylinders. It is a direct replacement for ISO 15552 cylinders such as SMC or Festo equivalents.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.