
The AirTAC SE50 Standard Cylinder SE50X50FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X50FA is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific SKU is equipped with a front flange (FA) mounting interface for rigid front-end support. It features field-adjustable air cushioning at both ends to soften hard end stops, though it lacks a built-in position sensor magnet. For direct retrofits, its standardized ISO 15552 dimensions ensure broad hardware interchangeability.
| Model | Airtac SE50 Standard Cylinder SE50X50FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force needed to reliably fold and seal corrugated cardboard flaps on high-speed packaging lines.
Utilizes its rigid FA front flange mount to precisely actuate safety gates and tool-change access panels on machining centers.
Leverages the 50 mm stroke to snap pneumatic diverter arms into place, routing packages along complex conveyor networks.
When sizing this actuator, consider stepping down to the 40 mm bore if your load requires less than 628 N of push at 0.5 MPa, or moving up to the 63 mm bore for 1559 N. This 50 mm model uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread. Because it lacks a built-in magnet, you cannot fit CMSE or DMSE sensors here; if position feedback is required, select an equivalent SKU with the -S option. Note that the adjustable end cushions only decelerate the piston near stroke end and will not hold a load if air pressure is lost.
Quick checklist
The SE50X50FA generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and reaches a maximum push of 200 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable with standard ISO 15552 cylinders, allowing you to use existing FA mounting hardware without redesigning your machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.