verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X50FTC

The AirTAC SE50 Standard Cylinder SE50X50FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke50 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$86.76 $94.26Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X50FTC

The AirTAC SE50X50FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers a robust 982 N push force at 0.5 MPa alongside an 825 N pull force, making it well-suited for mid-range automation tasks. The extruded aluminum barrel design omits external tie rods entirely, yielding a sleek, corrosion-resistant body that mounts flush against machine frames while retaining high structural rigidity.

This specific configuration includes an FTC integrated mounting interface and a 50 mm stroke. It features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a set screw to eliminate hard mechanical impacts. Note that this SKU is supplied without a built-in magnet, meaning it does not directly support AirTAC CMSE or DMSE position sensors without modification.

Airtac SE50 Standard Cylinder SE50X50FTC Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X50FTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke50 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X50FTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X50FTC Is Used

packaging

Carton Erector Flap Folding

Utilizes the 982 N push force and 50 mm stroke to rapidly fold and secure corrugated cardboard flaps during high-speed packaging line changeovers.

conveyor_belt

Belt Diverter Gate Actuation

Leverages the FTC mount and compact 50 mm stroke to pivot diverter arms on conveyor systems, accurately routing small to mid-size parcels between sorting lanes.

straighten

Sheet Metal Press Ejection

Employs the 825 N retract force to extract stamped sheet metal components from tight press dies, relying on the adjustable cushion to soften the return stroke.

Is the Airtac SE50 Standard Cylinder SE50X50FTC the Right Cylinder?

Choosing this 50 mm bore is optimal when your application requires the 982 N push force at 0.5 MPa. If your load demands less energy, stepping down to the 40 mm bore yields 628 N of push force, whereas upgrading to the 63 mm bore provides 1559 N for heavier payloads. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure drops or the valve centers; the piston will drift. For position-holding safety, consider the BSE rod-lock variant. To replace an existing cylinder, match the 50 mm bore, 50 mm stroke, PT1/4 port, and FTC mounting interface to guarantee a direct ISO 15552 dimensional interchange.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X50FTC FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, matching the standardized mounting footprint and PT1/4 port size. However, as a standard double-acting cylinder, it cannot hold a load unpowered; if air is lost, the piston will drift. You would need an external check valve or the AirTAC BSE series for secure position holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X50FTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X50FTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.