verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X85

The AirTAC SE50 Standard Cylinder SE50X85 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke85 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$69.76 $77.26Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X85

The AirTAC SE50X85 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 982 N push force at 0.5 MPa. Its 85 mm stroke provides exact linear motion for mid-range automation tasks. Because it uses a square extruded aluminum barrel without external tie rods, the body is highly compact and resistant to corrosion, mounting flush against machine frames to save valuable space.

This specific SKU is configured without a sensor magnet, meaning position detection is not onboard out of the box. To absorb kinetic energy at stroke ends, the cylinder relies on a field-adjustable air cushion at both ends rather than a fixed rubber bumper. By turning the cushion screw, technicians can precisely tune the deceleration to soften hard impacts at operating speeds up to 800 mm/s.

Airtac SE50 Standard Cylinder SE50X85 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X85
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke85 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X85

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X85 Is Used

packaging

Carton Erector Flaps

Utilizes the 982 N push force and 85 mm stroke to rapidly fold and square corrugated cardboard flaps on high-speed packaging lines.

conveyor_belt

Sorter Diverter Gate

Pivots routing arms on package conveyors, where the compact tie-rod-free profile allows tight mounting between adjacent belt rollers.

precision_manufacturing

CNC Fixture Clamp

Secures aluminum castings inside machining centers, using the adjustable end cushions to prevent jolting the workpiece during rapid retraction.

Is the Airtac SE50 Standard Cylinder SE50X85 the Right Cylinder?

When sizing this 50 mm bore model, consider stepping down to the 40 mm bore if your load requires less force, which provides a 628 N push at 0.5 MPa. If your application demands more thrust, stepping up to the 63 mm bore yields a 1559 N push at 0.5 MPa. Because this SKU lacks a position magnet, you cannot mount AirTAC CMSE or DMSE sensors for end-of-stroke detection without modifying the piston.

As a true ISO 15552 profile cylinder, the SE50X85 serves as a direct replacement for other ISO 15552 cylinders, matching standardized mounting dimensions and port sizes like PT1/4. Remember that the double-acting air operation does not hold a load if air pressure is lost; the piston will drift. For gravity-loaded vertical applications requiring static holding, a BSE rod lock variant or external pilot check valve is necessary.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X85 FAQ

The SE50X85 provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

This specific SE50X85 SKU is manufactured without a built-in piston magnet, so it cannot interface with AirTAC DMSE electronic or CMSE reed sensors. If position detection is required, you must select the SE50X85S variant with the magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X85

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X85 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.