Airtac SE50 Standard Cylinder SE50X95
The AirTAC Airtac SE50 Standard Cylinder SE50X95 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke95 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
About the Airtac SE50 Standard Cylinder SE50X95
The AirTAC SE50X95 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 50 mm bore and a 95 mm stroke. It generates 982 N of push force and 825 N of pull force at 0.5 MPa, making it well-suited for mid-range industrial actuation. Because this specific 95 mm stroke falls outside the standard stroke list, it is manufactured as a made-to-order unit to fit exact machinery spacing requirements.
Built with a square extruded aluminum barrel that eliminates external tie rods, the body is highly corrosion-resistant and mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends utilizes a 30 mm cushion length to decelerate the piston smoothly, allowing you to tune out hard end-stop impacts at operating speeds up to 30-800 mm/s. This SKU does not include a position sensor magnet.
Airtac SE50 Standard Cylinder SE50X95 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X95 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X95
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X95 Is Used
Carton Erector Flap Folding
Drives the mechanical folding arms on a continuous motion carton erector, utilizing the 982 N push force to cleanly crease heavy corrugated board at high cycle rates.
Bottling Line Diverter Gate
Actuates a pneumatic diverter arm on a glass bottling conveyor, using the 95 mm stroke to shift product lanes smoothly without overwhelming the frame.
CNC Lathe Bar Feeder
Pushes raw bar stock into the collet of an automated CNC lathe, where the adjustable end cushions absorb the kinetic energy of the 20 mm rod to prevent spindle shock.
Is the Airtac SE50 Standard Cylinder SE50X95 the Right Cylinder?
This 50 mm bore provides 982 N push at 0.5 MPa. If your application demands less force, the 40 mm bore yields 628 N push, whereas stepping up to the 63 mm bore provides 1559 N push. As a standard double-acting cylinder, the SE50X95 relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For drop-in retrofits, this cylinder is dimensionally interchangeable with any other ISO 15552 cylinder, utilizing a PT1/4 port and an M16x1.5 rod thread. Since the 95 mm stroke is non-standard, ensure your CAD models reflect the exact extended and retracted lengths before finalizing mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X95 FAQ
At 0.5 MPa, the SE50X95 delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes. The SE50X95 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, pilot diameter, and PT1/4 port locations as other ISO 15552 profile cylinders, allowing for a seamless drop-in replacement without bracket modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.