
The AirTAC SE63 Standard Cylinder SE63AX100 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX100 is a double-acting, single-rod ISO 15552 profile cylinder engineered for 1559 N push force at 0.5 MPa. This variant features a SUS420J2 stainless steel piston rod (code A), making it highly suitable for corrosive or washdown environments where standard carbon steel rods would degrade. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mount profile that resists contamination.
Unlike fixed rubber bumpers, this unit incorporates a field-adjustable pneumatic cushion at both ends, allowing technicians to fine-tune end-of-stroke deceleration and minimize mechanical shock. Note that this specific SKU lacks a built-in magnet, meaning it is not ready out-of-the-box for AirTAC CMSE or DMSE electronic position sensing.
| Model | Airtac SE63 Standard Cylinder SE63AX100 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leverages the SUS420J2 stainless rod to withstand daily washdowns while providing 1559 N of force to actuate flow diverter gates in food packaging lines.
Uses its 100 mm stroke and 2182 N of push at 0.7 MPa to reliably fold heavy cardboard flaps on high-speed corrugated box machinery.
Drives automated wiper blades across CNC machine beds, using its adjustable end cushions to soften repetitive impacts at 30-800 mm/s operating speeds.
Delivering 1559 N of push at 0.5 MPa, this 63 mm bore is a robust mid-range actuator. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N for heavier payloads. Keep in mind that a standard double-acting cylinder relies on continuous air pressure to maintain position; if air is lost or the valve is centered, the piston will drift. For positive holding without live pressure, consider the BSE rod-lock variant. Because this is a true ISO 15552 cylinder, it serves as a direct replacement for any ISO 15552 mounting interface, utilizing the standard PT3/8 port and 100 mm stroke.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
This specific SKU (SE63AX100) does not include a built-in magnet, so it cannot support CMSE reed or DMSE electronic sensors without modification. If position sensing is required, select an SE cylinder with the 'S' option code for the built-in magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.