Airtac SE63 Standard Cylinder SE63AX110
The AirTAC SE63 Standard Cylinder SE63AX110 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX110
The AirTAC SE63AX110 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a smooth, flush exterior that is highly resistant to corrosion and easy to mount cleanly in tight machinery spaces. Because this specific SKU uses the A code rod material, it is built with a SUS420J2 stainless steel piston rod designed specifically to withstand corrosive environments and washdown duty.
This 63 mm bore unit features a field-adjustable pneumatic cushion at both ends, allowing technicians to tune the end-of-stroke deceleration via a screw rather than relying on a fixed bumper. It operates at speeds from 30-800 mm/s using a PT3/8 port. Note that this configuration does not include a position-sensing magnet, so it cannot directly host AirTAC CMSE or DMSE switches without modification.
Airtac SE63 Standard Cylinder SE63AX110 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX110 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX110
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX110 Is Used
Flow Wrapper Infeed
Drives the infeed pusher on a stainless-steel flow wrapper, utilizing the 1559 N thrust and SUS420J2 rod to withstand daily chemical washdowns in a food packaging facility.
Pallet Straightener
Actuates the side alignment rails on a palletizer, using its 110 mm stroke to square pallets before stretch wrapping without risking rod corrosion in dusty environments.
Lab Sample Dispenser
Meters liquid reagents on a diagnostic analyzer, where the smooth tie-rod-free extruded profile prevents dust accumulation and eases sterilization protocols.
Is the Airtac SE63 Standard Cylinder SE63AX110 the Right Cylinder?
When sizing this 63 mm bore actuator, evaluate your exact thrust needs: the neighboring 50 mm bore provides 982 N of push at 0.5 MPa if you need a lighter, more compact footprint, while stepping up to the 80 mm bore yields 2513 N of push at 0.5 MPa for heavier payloads. Keep in mind that a standard double-acting cylinder like this relies on continuous air pressure to hold a load; if air is lost or the valve is centered, the piston will drift. For position holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve. At a 110 mm stroke, side-load stress on the M16x1.5 rod bearing is minimal, but always ensure the load is guided to prevent binding. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting hardware for easy retrofits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX110 FAQ
The SE63AX110 generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It uses a PT3/8 port and a 20 mm diameter SUS420J2 stainless steel rod.
No, the standard SE cylinder cannot hold a load when air pressure is lost or the valve is centered; the piston will drift. The adjustable air cushion at both ends only decelerates the piston near the stroke end and does not function as a brake. For fail-safe holding, you need the BSE variant with a rod lock or an external locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.