Airtac SE63 Standard Cylinder SE63AX115S
The AirTAC SE63 Standard Cylinder SE63AX115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 115mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke115 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX115S
The AirTAC SE63AX115S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous motion control. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull, making it well-suited for mid-weight industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint.
This specific configuration integrates a SUS420J2 stainless steel rod (code A) for enhanced resistance to corrosion and washdown environments. Equipped with a built-in magnet (code S), the cylinder seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to fine-tune deceleration, softening hard mechanical stops during high-speed operations.
Airtac SE63 Standard Cylinder SE63AX115S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX115S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX115S Is Used
Palletizing Arm Oscillator
Drives the horizontal push arm on a corrugated box palletizer, utilizing the 115 mm stroke to index containers onto a shipping platform.
Washdown Test Fixture
Leverages the SUS420J2 stainless rod to resist moisture exposure while clamping fluid processing components during high-pressure spray testing.
Metal Shear Hold-down
Applies 1559 N of clamping pressure to secure sheet metal against a CNC shear bed, preventing material drift during the cutting cycle.
Is the Airtac SE63 Standard Cylinder SE63AX115S the Right Cylinder?
Selecting the SE63X115S is optimal when your application requires approximately 1559 N of push force at 0.5 MPa. If your load demands less energy, stepping down to the 50 mm bore yields 982 N of push, whereas upgrading to the 80 mm bore provides 2513 N for heavier payloads. Because this is a double-acting cylinder, it relies on continuous air pressure to hold its position; if power fails or the valve centers, the piston will drift. For critical load-holding requirements, consider pairing this cylinder with an external pilot-operated check valve or upgrading to the AirTAC BSE rod-lock series.
As a true ISO 15552 profile cylinder, this model serves as a direct replacement for any standard ISO 15552 cylinder, sharing identical mounting interface dimensions and accessories. It features a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and an adjustable stroke of 115 mm. The standard 36 mm cushion length effectively absorbs kinetic energy at the end caps.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX115S FAQ
The SE63AX115S provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63AX115S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and accessory interface as other ISO 15552 profile cylinders. The built-in magnet also works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX115S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.