Airtac SE63 Standard Cylinder SE63AX150
The AirTAC SE63 Standard Cylinder SE63AX150 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX150
The AirTAC SE63AX150 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding automation environments. It delivers a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across a 150 mm stroke, utilizing a 63 mm bore and a PT3/8 port. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while integrating sensor grooves on three sides.
This specific configuration incorporates the code A SUS420J2 stainless steel piston rod, making it highly suitable for corrosive or washdown manufacturing settings. The cylinder features field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw to prevent hard impacts during high-speed cycling. Note that this SKU does not include a built-in magnet, so it is not natively equipped for CMSE or DMSE position sensing.
Airtac SE63 Standard Cylinder SE63AX150 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX150 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX150
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX150 Is Used
Food Packaging Diverters
Leverages the SUS420J2 stainless rod for washdown durability while providing 1559 N of push force to actuate lane diverter gates on packaging lines.
CNC Chuck Loading
Extends 150 mm to push bar stock into CNC lathe collets, using adjustable end cushions to soften the stroke when feeding heavy raw material.
Bottle Reject Arm
Deploys rapidly at up to 800 mm/s to reject off-spec bottles on a high-speed filling conveyor, relying on the tie-rod-free profile for tight clearance.
Is the Airtac SE63 Standard Cylinder SE63AX150 the Right Cylinder?
Selecting this 63 mm bore provides 1559 N of push force at 0.5 MPa. If your assembly requires less thrust, stepping down to the 50 mm bore yields 982 N at 0.5 MPa, whereas moving up to the 80 mm bore provides 2513 N at 0.5 MPa for heavier payloads. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; applications requiring true position holding under zero pressure must integrate an external rod lock or a BSE variant. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, matching the 63 mm bore, 150 mm stroke, PT3/8 port, and standard mounting accessory footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX150 FAQ
At 0.5 MPa, the SE63AX150 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63AX150 is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. It matches the standard 63 mm bore, 150 mm stroke, PT3/8 port, and mounting dimensions without requiring custom adapter plates.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.