Airtac SE63 Standard Cylinder SE63AX160
The AirTAC SE63 Standard Cylinder SE63AX160 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX160
The AirTAC SE63AX160 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. It features a 63 mm bore and a 160 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames, simplifying spatial constraints in tight retrofits.
This specific SKU is built with a SUS420J2 stainless steel rod (material code A) for superior resistance to moisture and corrosive washdowns. The standard PT3/8 port and M16x1.5 rod thread pair with a 36 mm adjustable air cushion at both ends. Because this unit lacks the -S magnet code, it does not support AirTAC CMSE or DMSE position sensors out of the box.
Airtac SE63 Standard Cylinder SE63AX160 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX160 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX160
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX160 Is Used
Bottle Capper Turrets
Drives the capping heads on beverage rotary fillers, where the 1559 N push clamps caps securely and the SUS420J2 rod withstands daily washdowns.
Food Grade Diverter Gates
Actuates stainless lane dividers on packaging conveyors, utilizing the smooth no-tie-rod profile to eliminate grease traps and bacterial buildup.
CNC Lathe Chip Wipers
Strokes 160 mm to actuate chip-clearing wipers on lathes, relying on the field-adjustable 36 mm air cushion to soften end-of-stroke impacts at high speeds.
Is the Airtac SE63 Standard Cylinder SE63AX160 the Right Cylinder?
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. If you need more power, stepping up to the 80 mm bore provides 2513 N of push. Remember that a plain SE cylinder cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding, consider the BSE rod lock variant or an external pilot-operated check valve. To match this exact ISO 15552 footprint, specify the 63 mm bore, 160 mm stroke, PT3/8 port, and your required mounting accessory. Since the stroke is 160 mm, keep side loads in check and use an external guide to prevent rod-bearing bending on long unsupported extensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX160 FAQ
At 0.5 MPa, it provides 1559 N of push and 1402 N of pull. At 0.7 MPa, the push increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63AX160 is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. Just match the 63 mm bore, 160 mm stroke, PT3/8 port, and mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.