Airtac SE63 Standard Cylinder SE63AX170S
The AirTAC SE63 Standard Cylinder SE63AX170S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke170 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX170S
The AirTAC SE63AX170S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 1559 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush and resists corrosion in tight machinery layouts.
This specific configuration features a SUS420J2 stainless steel rod (code A) for corrosive or washdown environments, and includes a built-in magnet (code S) for position sensing. The barrel houses sensor grooves on three sides, allowing you to slot in CMSE reed or DMSE electronic switches exactly where your cycle logic requires them.
Airtac SE63 Standard Cylinder SE63AX170S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX170S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX170S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX170S Is Used
Bottling Line Diverter
Actuates routing gates on a beverage conveyor, using the 170 mm stroke and 1559 N push to deflect heavy glass bottle traffic between packaging lanes.
Corrugated Box Flap Folder
Folds major flaps on large corrugated cartons, relying on the SUS420J2 stainless rod to withstand abrasive paper dust and occasional washdown.
CNC Lathe Door Glide
Slides a heavy safety enclosure open and closed, utilizing the adjustable end cushions to prevent slamming at the 170 mm stroke limit.
Is the Airtac SE63 Standard Cylinder SE63AX170S the Right Cylinder?
When sizing this 63 mm bore, compare its 1559 N push against the 50 mm bore (982 N push) if your load is lighter, or step up to the 80 mm bore (2513 N push) for heavier payloads. Because this is a standard ISO 15552 footprint, it serves as a direct replacement for other ISO 15552 cylinders, matching the 170 mm stroke, PT3/8 port, and your chosen mounting accessory. If your application must hold a load without live air pressure, note that the standard SE piston will drift; you should pivot to the BSE rod-lock variant or use an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX170S FAQ
At 0.5 MPa it provides 1559 N push and 1402 N pull; at 0.7 MPa the push is 2182 N. The maximum push is 318 kgf at 1.0 MPa, with an operating speed of 30-800 mm/s.
Yes. The SE63AX170S is dimensionally interchangeable per ISO 15552, meaning it shares the exact mounting interface, PT3/8 port, and 170 mm stroke of other standard profile cylinders, allowing a direct retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX170S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.