Airtac SE63 Standard Cylinder SE63AX175S
The AirTAC SE63 Standard Cylinder SE63AX175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX175S
The AirTAC SE63AX175S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. It features a 63 mm bore and a 175 mm stroke, making it a workhorse for mid-range industrial motion. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific configuration includes a SUS420J2 stainless steel rod (code A) for corrosive or washdown environments, and a built-in magnet (code S) for position sensing. The integrated magnet interfaces directly with AirTAC CMSE reed or DMSE electronic switches fitted into the sensor grooves on three sides of the body. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63AX175S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX175S Is Used
Corrugated Box Folding
Drives the folding arms on a packaging line, utilizing the 175 mm stroke to tuck flaps at high speed while the adjustable cushion absorbs the end-of-stroke shock.
Bottle Diverter Gate
Actuates a routing gate on a beverage conveyor, where the SUS420J2 stainless rod withstands daily washdowns and the 1559 N thrust easily pushes heavy product lanes.
CNC Lathe Chuck Door
Opens and closes the safety interlock door on a CNC lathe, relying on the compact tie-rod-free profile to fit tight machine envelopes and the magnet for door-closed feedback.
Is the Airtac SE63 Standard Cylinder SE63AX175S the Right Cylinder?
Selecting the SE63AX175S gives you 1559 N of push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore drops the output to 982 N, whereas stepping up to the 80 mm bore increases it to 2513 N. This 63 mm model uses a PT3/8 port and a 20 mm rod, providing a solid balance of thrust and structural rigidity. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve centers; the piston will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing direct retrofits using existing mounting hardware like FA front flanges or TC center trunnions. Ensure you specify the -S magnet in your RFQ if you intend to use CMSE or DMSE sensors for end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX175S FAQ
The SE63AX175S provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, it shares the exact ISO 15552 mounting interface, allowing direct replacement for other ISO 15552 profile cylinders using standard accessories. However, it does not hold its position unpowered; the adjustable air cushion only decelerates the piston near stroke end and is not a locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.