Airtac SE63 Standard Cylinder SE63AX180
The AirTAC SE63 Standard Cylinder SE63AX180 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX180
The AirTAC SE63AX180 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 63 mm bore and 180 mm stroke. This specific SKU is built with a SUS420J2 stainless steel rod (code A), making it highly suitable for corrosive or washdown applications where a standard carbon steel rod would degrade.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Although this particular unit lacks a position-sensing magnet, the body retains sensor grooves on three sides for future adaptability. Field-adjustable air cushions at both ends allow technicians to fine-tune end-of-stroke deceleration, protecting payloads from hard impacts.
Airtac SE63 Standard Cylinder SE63AX180 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX180 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX180
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX180 Is Used
Stainless Rod Washdown Diverter
Actuates routing gates on food packaging lines, leveraging the SUS420J2 rod to withstand daily chemical washdowns while delivering 1559 N push force.
Textile Loom Tensioning Arm
Drives a 180 mm stroke tensioning mechanism on industrial weaving equipment, using adjustable pneumatic cushions to soften rapid cycling.
Metal Sheet Press Brake
Provides consistent clamping pressure for sheet metal bending stations, utilizing its 63 mm bore to generate up to 318 kgf at maximum pressure.
Is the Airtac SE63 Standard Cylinder SE63AX180 the Right Cylinder?
Selecting this 63 mm bore provides 1559 N of push force at 0.5 MPa. If your application requires less force, the neighboring 50 mm bore yields 982 N; conversely, stepping up to the 80 mm bore provides 2513 N. This makes the SE63AX180 an ideal middle ground for medium-duty positioning. Because this model features the SUS420J2 stainless rod, it is purpose-fit for food packaging or chemical washdowns where rust prevention is critical.
As a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered; it cannot hold a load pneumatically without live pressure. For applications requiring true position holding upon air loss, consider the BSE rod-lock variant. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders without altering mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX180 FAQ
At 0.5 MPa, the SE63AX180 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push force is 318 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE63AX180 is a true ISO 15552 profile cylinder, meaning it is dimensionally interchangeable with other ISO 15552 cylinders. It uses standard mounting accessories and features a PT3/8 port. Note that this specific SKU lacks a magnet, so it does not support CMSE or DMSE position sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.