
The AirTAC SE63 Standard Cylinder SE63AX180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and 180 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. This specific configuration features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance in washdown or humid settings, alongside a built-in magnet (code S) for position sensing.
The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists dirt buildup and simplifies sensor placement across three integrated grooves. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting payloads from harsh mechanical impacts at operating speeds up to 800 mm/s.
| Model | Airtac SE63 Standard Cylinder SE63AX180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the sealing and cutting head on vertical form-fill-seal machines, utilizing the 1559 N push force to cleanly sever packaging films while the SUS420J2 rod resists moisture from washdowns.
Actuates a routing flap on a conveyor line to divert heavy wooden pallets, relying on the adjustable cushion to soften the 180 mm stroke end-stop and prevent mechanical shock.
Pushes sample racks into a laboratory centrifuge chamber, where the -S magnet triggers DMSE electronic sensors to confirm rack insertion and the stainless rod prevents corrosion.
Choose this 63 mm bore when your application requires the 1559 N push at 0.5 MPa; if you need less force, step down to the 50 mm bore (982 N push), or step up to the 80 mm bore (2513 N push) for heavier loads. With an 180 mm stroke, this model falls below the 300 mm threshold where severe side-loading typically necessitates an external guide, though the 20 mm rod and M16x1.5 thread handle standard axial loads well. Remember that a standard SE cylinder does not hold its position if air pressure is lost; for fail-safe load holding, consider the BSE rod-lock variant. For ISO 15552 dimensional interchangeability, match the 63 mm bore, 180 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63AX180S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface as other ISO 15552 profile cylinders. Just ensure your existing setup matches the PT3/8 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.