
The AirTAC SE63 Standard Cylinder SE63AX190 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX190 is a double-acting ISO 15552 profile cylinder engineered for a 63 mm bore and a 190 mm stroke. It features a SUS420J2 stainless steel piston rod (code A) specifically selected for corrosive or washdown environments. Delivering a robust 1559 N push force at 0.5 MPa, it operates efficiently between 0.15-1.0 MPa with a speed range of 30-800 mm/s.
This extruded aluminum body omits external tie rods for a compact, flush-mount profile that resists debris buildup. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, protecting machinery from hard impacts. Note this specific SKU lacks a position-sensing magnet.
| Model | Airtac SE63 Standard Cylinder SE63AX190 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the 190 mm layer push-off arm in a washdown palletizer, utilizing the 1559 N force and SUS420J2 rod to withstand harsh cleaning cycles.
Actuates a stainless-steel diverter gate in a chemical blending line, where the corrosion-resistant rod and 63 mm bore output reliably route heavy powder flows.
Provides 1402 N of retract pull force to hold a machining fixture clamp, using the adjustable cushion to soften the stroke end and protect the fixture alignment.
Selecting the SE63AX190 provides 1559 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N, while moving up to the 80 mm bore provides 2513 N. This 190 mm stroke is a standard length, but at this extension you should consider side-load impacts on the M16x1.5 rod thread and utilize an external guide to prevent rod-bearing bending. Because this is a double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered; use a BSE rod lock for secure positioning. The PT3/8 port and ISO 15552 mounting interface make it a direct replacement for any standard 63 mm profile cylinder.
Quick checklist
The 63 mm bore generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. It uses a 20 mm SUS420J2 stainless steel rod with an M16x1.5 thread.
Yes, the square extruded aluminum profile offers exact ISO 15552 dimensional interchangeability for direct retrofits using standard mounting accessories. This specific SKU does not include a position-sensing magnet, so CMSE or DMSE electronic switches cannot be used without modifying the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.