Airtac SE63 Standard Cylinder SE63AX195
The AirTAC SE63 Standard Cylinder SE63AX195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX195
The AirTAC SE63AX195 is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 1559 N push force at 0.5 MPa. It features a 63 mm bore and a 195 mm stroke, utilizing a PT3/8 port and a 20 mm piston rod threaded M16x1.5. Because this SKU uses the A-code rod material, it is built from SUS420J2 stainless steel, making it highly suitable for corrosive or washdown environments where a standard carbon steel rod would degrade.
The extruded aluminum barrel design eliminates external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves. It incorporates field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a set screw to absorb hard impacts during high-speed 30-800 mm/s operations. Note that this specific configuration does not include a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE63 Standard Cylinder SE63AX195 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX195
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX195 Is Used
Bottling Line Diverter
Ideal for routing stainless steel containers on a washdown bottling line, utilizing the 1559 N push force and SUS420J2 rod to withstand frequent chemical cleaning.
Food Grade Sorting Gate
Actuates sorting gates on a food processing conveyor, where the corrosion-resistant rod material and adjustable end cushions safely handle 195 mm stroke movements.
Lab Test Fixture Clamp
Secures test specimens in high-humidity laboratory chambers, using its 1402 N pull force to maintain grip without rusting in damp environments.
Is the Airtac SE63 Standard Cylinder SE63AX195 the Right Cylinder?
This 63 mm bore provides 1559 N of push force at 0.5 MPa. If your application requires less force, the neighbouring 50 mm bore offers 982 N push, while stepping up to the 80 mm bore yields 2513 N push for heavier loads. Keep in mind that a standard double-acting cylinder does not hold its load when air pressure is lost or the valve is centered; the piston will drift. If your machine requires true position holding without live pressure, consider the BSE rod-lock variant. Furthermore, with a 195 mm stroke approaching the 300 mm threshold, you should evaluate potential rod-bearing bending under high side loads and utilize an external guide to prevent premature seal wear. For retrofitting, this model is dimensionally interchangeable with other ISO 15552 cylinders, matching the 63 mm bore, 195 mm stroke, PT3/8 port, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX195 FAQ
The SE63AX195 generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operating at the maximum 1.0 MPa pressure.
Yes, the SE63AX195 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders. However, note that this specific SKU lacks a built-in magnet, so it will not trigger CMSE or DMSE position sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.