Airtac SE63 Standard Cylinder SE63AX200
The AirTAC SE63 Standard Cylinder SE63AX200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX200
The AirTAC SE63AX200 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. It features a 63 mm bore and a 200 mm stroke, making it well-suited for mid-range industrial actuation.
This variant uses a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance in washdown or humid environments. The extruded aluminum barrel eliminates external tie rods for a compact, flush-mount profile, while the field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for moving loads.
Airtac SE63 Standard Cylinder SE63AX200 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX200
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX200 Is Used
Bottling Line Diverter
Utilizes the 1559 N push force and SUS420J2 rod to reliably deflect heavy PET bottle containers on a washdown-grade packaging conveyor.
Pallet Film Clamp
Actuates a 200 mm stroke clamping arm to secure stretch film rolls, benefiting from the compact tie-rod-free barrel in tight cell layouts.
CNC Fixture Lock
Locks aluminum castings into a machining fixture, using the adjustable end cushions to soften the 63 mm bore impact during rapid clamping.
Is the Airtac SE63 Standard Cylinder SE63AX200 the Right Cylinder?
Choose this 63 mm bore when you need substantial thrust; if your application is lighter, stepping down to the 50 mm bore yields 982 N push at 0.5 MPa, while upgrading to the 80 mm bore provides 2513 N push. Because this SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors—if endpoint confirmation is required, select an -S model. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders without changing mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX200 FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The air supply connects via a PT3/8 port.
No, the adjustable air cushion at both ends is designed strictly to decelerate the piston near the stroke limits, not to act as a brake or lock. If your application requires holding a load without live air pressure, you should use a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.