
The AirTAC SE63 Standard Cylinder SE63AX200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX200S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous washdown and corrosive environments. It features a SUS420J2 stainless steel piston rod (code A) paired with a square extruded aluminum barrel that eliminates external tie rods. This clean profile prevents debris trapping while delivering a robust 1559 N push force at 0.5 MPa and a 2182 N push at 0.7 MPa.
Equipped with a built-in position magnet (code S), this unit directly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling without acting as a physical lock.
| Model | Airtac SE63 Standard Cylinder SE63AX200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates high-speed lane dividers on a stainless steel washdown line, utilizing the 1559 N push force and SUS420J2 rod to withstand daily chemical spraydowns.
Drives the folding mechanism on a packaging machine, relying on the 200 mm stroke and adjustable end cushions to prevent crushing the cardboard at 800 mm/s.
Pushes completed layer patterns onto a transfer roller conveyor, where the built-in magnet triggers DMSE electronic sensors to confirm full extension.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (providing 982 N push @0.5 MPa) lacks the thrust for your process, but an 80 mm unit (2513 N push @0.5 MPa) would be physically oversized. The 200 mm stroke provides ample travel for mid-range actuation. Because the standard SE series relies on live air pressure to maintain position, the piston will drift if air is lost or the valve centers; applications requiring true load holding without live pressure should integrate a BSE rod lock or external pilot-operated check valve.
For retrofitting, this model is dimensionally interchangeable per ISO 15552, allowing a direct replacement for other ISO 15552 cylinders using existing mounting hardware. It uses a PT3/8 port and a 20 mm rod with an M16x1.5 thread. At 200 mm of travel, side loading remains moderate, but always ensure the rod-end joint is properly aligned to avoid premature bearing wear.
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63AX200S features a standard ISO 15552 / VDMA 24562 mounting interface, meaning it is dimensionally interchangeable with other ISO 15552 profile cylinders. You can reuse existing mounting brackets and rod-end joints (M16x1.5) for a fast retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.