Airtac SE63 Standard Cylinder SE63AX210
The AirTAC SE63 Standard Cylinder SE63AX210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX210
The AirTAC SE63AX210 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 210 mm non-standard stroke. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a PT3/8 port and a 20 mm rod with an M16x1.5 thread. Because the stroke is non-standard, this specific unit is made-to-order for specialized travel requirements.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced resistance in corrosive or washdown environments. The extruded aluminum barrel eliminates external tie rods, keeping the body compact and flush-mountable while resisting contamination. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting machinery from hard impacts.
Airtac SE63 Standard Cylinder SE63AX210 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX210 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX210
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX210 Is Used
Bottling Line Diverter
Handles 1559 N push force at 0.5 MPa to reroute PET bottles on a high-speed filling line, leveraging the SUS420J2 rod for frequent washdowns.
CNC Lathe Chip Blower
Extends 210 mm to clear metal chips from a machining zone, using the compact no-tie-rod profile to fit tightly within the machine enclosure.
Corrugated Box Flap Folder
Drives a folding arm to seal carton flaps, relying on the field-adjustable air cushions to soften end stops and prevent tearing the cardboard.
Is the Airtac SE63 Standard Cylinder SE63AX210 the Right Cylinder?
If your application requires less force, stepping down to a 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, moving up to an 80 mm bore provides 2513 N of push at 0.5 MPa for heavier loads. This model lacks the -S magnet, so it cannot host CMSE or DMSE position sensors without modification; if automation feedback is required, select an -S variant. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing FA, FB, or TC mounting hardware.
Because the 210 mm stroke exceeds the standard stroke list, it is manufactured as a special order. Furthermore, at strokes of 300 mm or more, the unsupported piston rod is highly susceptible to bending under side loads; for this 210 mm travel, an external guide is still recommended to prevent premature rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near the stroke ends—it does not hold a load. If position holding is required when air is exhausted, a BSE rod lock variant is necessary.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX210 FAQ
This 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE63AX210 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface as other ISO 15552 profile cylinders. You can drop it into existing mounts without redesigning your fixture.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.