Airtac SE63 Standard Cylinder SE63AX220S
The AirTAC SE63 Standard Cylinder SE63AX220S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke220 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX220S
The AirTAC SE63AX220S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous duty. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull, making it well-suited for mid-weight industrial positioning. Equipped with a SUS420J2 stainless steel piston rod, this variant directly addresses washdown and mildly corrosive environment requirements without sacrificing mechanical strength.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists debris buildup and simplifies sensor placement along three integrated grooves. Because the model carries the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, effectively absorbing impact energy rather than relying on a static rubber bumper.
Airtac SE63 Standard Cylinder SE63AX220S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX220S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX220S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX220S Is Used
Flow Wrapper Infeed
Drives the infeed pusher on a continuous motion flow wrapper, utilizing the 1559 N push force and SUS420J2 rod to withstand frequent washdowns.
Pallet Diverter Gate
Actuates a heavy-duty diverter arm on a pallet handling conveyor, relying on the 220 mm stroke and adjustable cushioning to soften end stops at speed.
Lab Sample Carousel
Indexes a sample carousel in an automated analytical lab, where the CMSE/DMSE sensor magnet provides precise positional feedback for the 63 mm bore.
Is the Airtac SE63 Standard Cylinder SE63AX220S the Right Cylinder?
When sizing this 63 mm bore actuator, evaluate your force needs bidirectionally. Stepping down to a 50 mm bore reduces the 0.5 MPa push capacity to 982 N, whereas moving up to an 80 mm bore increases it to 2513 N. This SE63AX220S uses a PT3/8 port and an M16x1.5 rod thread. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile cylinders, utilizing shared mounting accessories like FA front flanges or TC center trunnions.
With a 220 mm stroke, the unsupported rod length extends considerably during operation. To prevent rod-bearing bending under side loads, incorporating an external linear guide is highly recommended. Additionally, remember that the internal air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If your application requires position holding without live air pressure, a BSE rod lock variant or an external pilot-operated check valve is necessary.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX220S FAQ
This 63 mm bore cylinder features a PT3/8 port and generates 1559 N push and 1402 N pull at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, its standardized ISO 15552 mounting dimensions make it a direct replacement for other profile cylinders. However, it cannot hold a load unpowered; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX220S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.