Airtac SE63 Standard Cylinder SE63AX230S
The AirTAC SE63 Standard Cylinder SE63AX230S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX230S
The AirTAC SE63AX230S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and a 230 mm stroke. The SUS420J2 stainless steel rod (code A) provides superior corrosion resistance, making this unit ideal for washdown or high-moisture industrial settings.
This extruded aluminum barrel design eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames. Equipped with a built-in magnet (code S), the cylinder seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration on the fly, softening hard end stops at operating speeds up to 800 mm/s.
Airtac SE63 Standard Cylinder SE63AX230S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX230S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX230S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX230S Is Used
Bottling Line Diverter
Leverages the 1559 N push force and SUS420J2 stainless rod to reliably deflect plastic bottles on a high-speed washdown conveyor.
Pallet Film Clamp
Utilizes the 230 mm stroke and built-in magnet to confirm clamp position on stretch-wrap machinery in humid packaging environments.
Textile Loom Tensioner
Deploys the adjustable pneumatic cushioning to soften rapid stroke ends, preventing yarn snags while maintaining precise tension.
Is the Airtac SE63 Standard Cylinder SE63AX230S the Right Cylinder?
Selecting the SE63AX230S gives you 1559 N of push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N; conversely, scaling up to the 80 mm bore provides 2513 N. Because this unit features a 230 mm stroke, the 20 mm rod and its M16x1.5 thread handle substantial side loads, though an external guide rail is recommended to prevent rod-bearing bending over long unsupported extensions. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, utilizing standard mounting accessories and a PT3/8 port.
Note that the adjustable air cushion only decelerates the piston near the stroke end; it is not a locking mechanism. If your machinery must hold a vertical load without live air pressure, you must integrate an external rod lock like the AirTAC BSE series or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX230S FAQ
The SE63AX230S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, acting as a direct retrofit for other profile cylinders. The built-in magnet (S code) is specifically designed to trigger AirTAC CMSE reed switches and DMSE electronic sensors along the three sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.