
The AirTAC SE63 Standard Cylinder SE63AX25S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX25S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 63 mm bore and a 25 mm stroke, delivering a robust 1559 N push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a SUS420J2 stainless steel rod (option A), this unit is specifically configured for corrosive or washdown environments. The integrated magnet (option S) enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration and eliminate hard end-stop impacts.
| Model | Airtac SE63 Standard Cylinder SE63AX25S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 25 mm sealing jaw on a packaging line, utilizing the 1559 N push force and SUS420J2 rod to withstand daily washdowns.
Actuates a short-stroke safety gate on a CNC lathe, relying on the DMSE electronic sensor feedback for precise interlocking.
Switches a diverter valve in a chemical dispensing manifold, where the stainless steel rod prevents corrosion from aggressive solvents.
Selecting the SE63AX25S is ideal when your application requires 1559 N of push force at 0.5 MPa within a short 25 mm travel. If you need to step down, the 50 mm bore provides 982 N of push, while stepping up to the 80 mm bore yields 2513 N. Because this is a standard ISO 15552 footprint, it serves as a direct dimensional replacement for other ISO 15552 cylinders, utilizing standard mounting accessories and a PT3/8 port.
This cylinder features a Ø20 mm rod and an M16x1.5 thread, providing a rigid interface for the 25 mm stroke. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If your process requires the cylinder to hold a load without live air pressure, you must integrate a BSE rod lock or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, the SE63AX25S provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63AX25S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the standardized mounting interface and PT3/8 port size, allowing you to drop it into existing machinery without modifying the mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.