Airtac SE63 Standard Cylinder SE63AX260
The AirTAC SE63 Standard Cylinder SE63AX260 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 260mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke260 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX260
The AirTAC SE63AX260 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while preventing debris buildup.
This specific SKU features a SUS420J2 stainless steel piston rod (option A) tailored for corrosive or washdown environments. Although it lacks a built-in position sensor magnet, the body retains sensor grooves on three sides for future flexibility, and the field-adjustable air cushioning at both stroke ends allows precise deceleration tuning for moving loads.
Airtac SE63 Standard Cylinder SE63AX260 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX260 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX260
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX260 Is Used
Carton Erector Flaps
Provides the 1559 N push at 0.5 MPa needed to reliably fold heavy cardboard carton flaps in high-speed packaging lines, while the SUS420J2 rod withstands washdown cycles.
Pallet Diverters
Handles the 260mm stroke requirement to push loaded pallets onto secondary conveyor tracks, benefiting from the adjustable end cushions to soften hard stops at speed.
Lab Sample Handling
Moves stainless steel sample racks in chemical testing labs where the SUS420J2 rod material prevents corrosion from accidental solvent exposure.
Is the Airtac SE63 Standard Cylinder SE63AX260 the Right Cylinder?
Delivering 1559 N of push at 0.5 MPa, this 63mm bore fits neatly between the 50mm bore (982 N push) and the 80mm bore (2513 N push), allowing you to scale up or down depending on your actual load requirements. It uses a PT3/8 port and a 260mm stroke. Since this is a standard double-acting cylinder, note that it will not hold a load if air pressure is lost; for position-holding safety, consider the BSE rod-lock variant. Additionally, at 260mm of stroke, the M16x1.5 rod and internal bearing face bending forces under heavy side loads, so implementing an external guide rail is recommended for optimal longevity.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX260 FAQ
The SE63AX260 generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63AX260 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and accessory interface of other ISO 15552 profile cylinders. Just ensure your setup accommodates the PT3/8 port and the 260mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX260
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.