Airtac SE63 Standard Cylinder SE63AX30S
The AirTAC SE63 Standard Cylinder SE63AX30S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke30 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX30S
The AirTAC SE63AX30S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. It features a 63 mm bore and a compact 30 mm stroke, making it ideal for short-travel clamping and lifting tasks.
This variant utilizes a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance in washdown environments, and includes a built-in magnet (code S) for use with CMSE reed and DMSE electronic position sensors. The extruded aluminum barrel omits external tie rods, yielding a sleek, easy-to-clean profile that mounts flush against machine frames.
Airtac SE63 Standard Cylinder SE63AX30S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX30S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX30S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX30S Is Used
Stainless Steel Food Gate
Short 30 mm stroke and SUS420J2 rod drive a diverter gate in a washdown packaging line, resisting moisture while providing 1559 N of clamping force.
Aluminum Extrusion Stop
Acts as a hard stop for aluminum profiles at a cutting saw, using its 2182 N push force at 0.7 MPa to halt the stock without deflection.
Bottle Sorting Diverter
Integrated DMSE electronic sensors detect the 30 mm travel to trigger a sorting arm, accurately routing plastic bottles on a high-speed conveyor.
Is the Airtac SE63 Standard Cylinder SE63AX30S the Right Cylinder?
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513 N for heavier loads. Because this is a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standard mounting accessories like FA front flanges or LB foot brackets. The port size is PT3/8. Note that the field-adjustable air cushions at both ends decelerate the piston near stroke end but do not lock the rod; if you need to hold a load vertically without live air pressure, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX30S FAQ
At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63AX30S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and port locations (PT3/8) as other standard ISO 15552 profile cylinders, allowing for a direct retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.