
The AirTAC SE63 Standard Cylinder SE63AX325 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 325mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX325 is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. Its 325 mm stroke and 63 mm bore suit mid-weight processing tasks. The extruded aluminum barrel lacks external tie rods, yielding a flush body that resists corrosion and simplifies surface mounting.
This SKU features a SUS420J2 stainless steel rod (code A) for corrosive or washdown environments. It lacks a built-in magnet, so position sensing is unavailable on this specific unit. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a screw, softening hard impacts at operating speeds up to 800 mm/s.
| Model | Airtac SE63 Standard Cylinder SE63AX325 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Lifts and stages empty pallets in packaging lines, utilizing the 1559 N push force to overcome gravity and friction reliably.
Actuates routing flaps in food processing, where the SUS420J2 stainless rod resists moisture and harsh cleaning chemicals.
Opens heavy machine tool safety enclosures, relying on the adjustable cushion to soften the 325 mm travel at high speed.
If you need less force, the 50 mm bore provides 982 N push at 0.5 MPa; stepping up to the 80 mm bore yields 2513 N. Because this plain SE cylinder lacks a rod lock, the piston will drift if air pressure is lost or the valve is centered. For this 325 mm stroke, the 20 mm rod and M16x1.5 thread carry moderate side loads, but an external guide is recommended for heavy unsupported loads. As a dimensionally interchangeable ISO 15552 cylinder, it drops in for other standard 63 mm bore, 325 mm stroke, PT3/8 ported units using existing FA or LB hardware.
Quick checklist
The SE63AX325 provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It features a 63 mm bore and a 325 mm stroke.
Yes. The SE63AX325 is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other 63 mm profile cylinders with a 325 mm stroke and PT3/8 port. You can reuse your existing mounting hardware and sensor brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.