Airtac SE63 Standard Cylinder SE63AX40S
The AirTAC SE63 Standard Cylinder SE63AX40S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 40mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke40 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX40S
The AirTAC SE63AX40S is a double-acting ISO 15552 profile cylinder engineered for rigorous actuation. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull, making it highly capable for mid-weight industrial tasks. The 63 mm bore utilizes a PT3/8 port and a 20 mm rod, perfectly balancing airflow and structural rigidity.
This specific configuration features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance in washdown or humid environments. The integrated magnet (code S) enables seamless positioning feedback via AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush while resisting contamination buildup.
Airtac SE63 Standard Cylinder SE63AX40S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX40S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX40S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX40S Is Used
Palletizer Push-off
Drives the 40 mm diverter stroke on a washdown palletizer, utilizing the 1559 N push force and SUS420J2 rod to resist moisture during beverage line changeovers.
CNC Fixture Clamp
Secures raw aluminum castings inside a machining cell, relying on the DMSE electronic sensor to confirm the 1402 N pull clamping state before the spindle starts.
Bottle Sorting Gate
Actuates a high-speed routing gate on a bottling conveyor, where the adjustable end cushions absorb kinetic energy to prevent hard mechanical stops at 800 mm/s.
Is the Airtac SE63 Standard Cylinder SE63AX40S the Right Cylinder?
Selecting the SE63AX40S is ideal when your application requires 1559 N of push force at 0.5 MPa within a tight 40 mm stroke. If your load demands less energy, stepping down to the 50 mm bore yields 982 N of push, whereas scaling up to the 80 mm bore provides 2513 N. Because this is a standard double-acting cylinder, it will not hold a load mechanically if air pressure is lost; for vertical positioning safety, consider a BSE rod lock variant. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 63 mm bore, 40 mm stroke unit with a PT3/8 port and matching mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX40S FAQ
At 0.5 MPa, the SE63AX40S provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and achieves speeds of 30-800 mm/s.
Yes, the SE63AX40S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware. The 'A' in the model denotes a SUS420J2 stainless steel rod for corrosive environments, and the 'S' indicates a built-in magnet for use with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.