Airtac SE63 Standard Cylinder SE63AX60
The AirTAC SE63 Standard Cylinder SE63AX60 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX60
The AirTAC SE63AX60 is a double-acting, single-rod ISO 15552 profile cylinder delivering 1559 N of push force and 1402 N of pull force at 0.5 MPa. It features a 63 mm bore, a 60 mm stroke, and a PT3/8 port. Built with a SUS420J2 stainless steel rod (material code A), it is engineered for corrosive and washdown environments where standard carbon steel rods would degrade.
The extruded aluminum barrel omits external tie rods, yielding a smooth, compact body that mounts flush against machine frames while resisting debris buildup. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling. Note this unit lacks a built-in magnet, so it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE63 Standard Cylinder SE63AX60 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX60 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX60
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX60 Is Used
Stainless Pouch Sealing
Drives the sealing jaws on vertical form-fill-seal equipment. The 1559 N push force at 0.5 MPa provides ample clamping pressure for packaging films, while the SUS420J2 rod resists washdown chemicals during sanitation shifts.
Diversion Gate Actuation
Powers a pneumatic sorting flap on a logistics conveyor. The 60 mm stroke rapidly extends and retracts the diverter arm to route parcels, benefiting from the adjustable end cushions to soften mechanical stops at high speeds.
Lab Sample Ejection
Ejects processed fluid samples from a diagnostic carousel. The corrosion-resistant stainless rod tolerates accidental chemical exposure, and the smooth profile barrel prevents biological buildup in laboratory settings.
Is the Airtac SE63 Standard Cylinder SE63AX60 the Right Cylinder?
This 63 mm bore generates 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore offers 982 N of push; if you need to move heavier loads, stepping up to the 80 mm bore provides 2513 N of push at the same 0.5 MPa pressure. Because this is a double-acting cylinder, it relies on live air pressure to hold its position and will drift if air is lost or the valve centers—use an external rod lock or pilot-operated check valve for static holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct retrofit for other ISO 15552 profile cylinders using standard mounting accessories like FA or LB brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX60 FAQ
At 0.5 MPa, the SE63AX60 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the SE63AX60 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using your existing mounting hardware. Note that this specific SKU lacks a built-in magnet, so if your current setup relies on reed or electronic sensors, you would need a model with the -S option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.