
The AirTAC SE63 Standard Cylinder SE63AX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX600 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 20 mm rod with an M16x1.5 thread. This specific SKU features a SUS420J2 stainless steel rod (code A), making it highly suitable for corrosive environments or washdown duty where a standard carbon steel rod would fail.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Although this unit lacks a position-sensing magnet, it retains field-adjustable air cushioning at both ends. You can tune the 36 mm cushion zones via set screws to precisely decelerate heavy loads over the long 600 mm travel, preventing hard end-stop impacts.
| Model | Airtac SE63 Standard Cylinder SE63AX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes heavy beverage crates on a washdown conveyor using the 1559 N push force, relying on the SUS420J2 stainless rod to withstand daily chemical cleaning.
Raises and lowers the film carriage 600 mm, utilizing the adjustable end cushions to smoothly stop the vertical load without jarring the stretch wrap mechanism.
Actuates a 600 mm chip-disposal gate in a machining center, where the stainless steel rod resists corrosive cutting fluids and metal shavings.
Selecting this 63 mm bore yields 1559 N push and 1402 N pull at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore provides 982 N push, whereas upgrading to the 80 mm bore offers 2513 N push. Because this model features a 600 mm stroke, the extended piston rod is subject to bending forces under side loads; an external guide rail is strongly recommended to prevent rod-bearing wear and premature seal failure.
As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing identical mounting and PT3/8 port interfaces. Note that a plain SE cylinder drifts when air pressure is lost or the valve is centered; it cannot hold a load without live pressure. If your 600 mm stroke application requires position holding upon air loss, consider the BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N push and 1402 N pull. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders and uses standard mounting accessories. However, this specific SKU lacks the built-in magnet (-S) required for CMSE reed or DMSE electronic sensors, so position sensing cannot be added without modifying the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.