Airtac SE63 Standard Cylinder SE63AX60S
The AirTAC SE63 Standard Cylinder SE63AX60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX60S
The AirTAC SE63AX60S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous linear motion tasks. Featuring a 63 mm bore and a 60 mm stroke, it delivers a robust 1559 N push force at 0.5 MPa and 2182 N at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for universal hardware compatibility.
This specific configuration incorporates a SUS420J2 stainless steel rod (code A) for superior resistance to moisture and corrosive washdown environments. A built-in magnet (code S) enables seamless position sensing with AirTAC CMSE reed and DMSE electronic switches fitted into the sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
Airtac SE63 Standard Cylinder SE63AX60S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX60S Is Used
Pouch Sealing Jaws
Drives the sealing jaws on continuous-flow packaging lines, utilizing the 1559 N push force to cleanly crimp and sever packaging films despite sticky residues.
Bottle Diverters
Actuates stainless diverter arms on beverage conveyor belts, where the SUS420J2 rod resists washdown chemicals and the 60 mm stroke provides rapid lane switching.
CNC Lathe Unloaders
Pushes finished turned parts out of CNC lathe spindles, using the built-in magnet and DMSE sensor to confirm part ejection before the automatic door opens.
Is the Airtac SE63 Standard Cylinder SE63AX60S the Right Cylinder?
Choosing the SE63AX60S places you in the mid-force tier of the SE range. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513 N to drive heavier mechanisms. Remember that a standard double-acting cylinder relies on continuous air pressure to hold its position; if air is lost or the valve centers, the piston will drift. For critical load-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve.
To guarantee a direct replacement, match the 63 mm bore, 60 mm stroke, PT3/8 port, and your required mounting accessory (such as FA front flange or TC centre trunnion). The SUS420J2 rod and -S magnet directly address washdown and sensing requirements. Because the stroke is under 300 mm, the 20 mm rod and M16x1.5 thread handle moderate side loads effectively without requiring an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX60S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, the SE63AX60S shares standard ISO 15552 / VDMA 24562 mounting dimensions, making it a direct retrofit for other profile cylinders. Its end-of-stroke air cushioning is field-adjustable via a screw at both ends, allowing you to tune deceleration to prevent harsh impacts without relying on fixed rubber bumpers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.