verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63AX700S

The AirTAC SE63 Standard Cylinder SE63AX700S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke700 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$241.24 $248.74Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE63 Standard Cylinder SE63AX700S

The AirTAC SE63AX700S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63mm bore and a 700mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a PT3/8 port and a 20mm SUS420J2 stainless steel rod. The code A rod material provides enhanced corrosion resistance for washdown or mildly aggressive environments, while the built-in S magnet enables precise position sensing with CMSE reed or DMSE electronic switches.

Built around a square extruded aluminum barrel without external tie rods, this profile cylinder offers a compact, easy-to-mount flush surface that resists impact. The pneumatic cushioning at both ends is field-adjustable via a setscrew, allowing you to tune deceleration and soften hard end stops during high-speed operations. It is a true ISO 15552 cylinder, dimensionally interchangeable for seamless retrofitting into existing standard footprints.

Airtac SE63 Standard Cylinder SE63AX700S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63AX700S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke700 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63AX700S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63AX700S Is Used

conveyor_belt

Pallet Transfer Line

Drives a 700mm stroke pusher on a washdown pallet conveyor, utilizing the 1559 N thrust and the SUS420J2 stainless rod to withstand humid or splash-exposed packaging environments.

packaging

Case Erector Arm

Actuates the folding arm on a heavy-duty case erector, where the adjustable pneumatic cushion safely decelerates the 63mm bore mechanism at high cycle speeds.

straighten

Metal Staging Gate

Operates a 700mm diversion gate in a metal stamping line, relying on the no-tie-rod profile for flush mounting and the built-in magnet for DMSE electronic end-position verification.

Is the Airtac SE63 Standard Cylinder SE63AX700S the Right Cylinder?

When sizing this 63mm bore cylinder, consider stepping down to a 50mm bore (providing 982 N push at 0.5 MPa) for lighter loads, or up to an 80mm bore (delivering 2513 N push at 0.5 MPa) if your application requires greater thrust. To execute a direct ISO 15552 replacement, match the 63mm bore, 700mm stroke, PT3/8 port, and your required mounting accessory, ensuring the S magnet is specified for CMSE / DMSE sensor integration.

With a 700mm stroke, the unsupported rod length increases the risk of rod-bearing bending under side loads; an external guide is highly recommended to prevent premature wear. Additionally, remember that a plain SE cylinder does not hold its load when air is lost or the valve is centered, as the piston will drift. If static holding is required, explore a BSE rod lock variant or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63AX700S FAQ

The 63mm bore SE63AX700S generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.

No, a standard double-acting SE cylinder will drift if air is lost or the valve is centered. The field-adjustable air cushion at both ends only decelerates the piston near stroke end; it does not act as a brake or lock. For position holding, consider the BSE rod lock variant or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63AX700S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE63AX700S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.