Airtac SE63 Standard Cylinder SE63AX800S
The AirTAC SE63 Standard Cylinder SE63AX800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke800 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX800S
The AirTAC SE63AX800S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It features a 63 mm bore and an 800 mm stroke, generating 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while providing sensor grooves on three sides for flexible positioning.
This specific configuration integrates a SUS420J2 stainless steel rod (code A) for enhanced resistance to corrosion and washdown chemicals, alongside a built-in magnet (code S) for non-contact position detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed operation.
Airtac SE63 Standard Cylinder SE63AX800S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX800S Is Used
Bottling Line Diverter
Routes heavy PET bottle matrices on high-speed packaging lines using the 1559 N push force and SUS420J2 rod to withstand caustic washdowns.
CNC Lathe Loader
Feeds bar stock into CNC spindles across an 800 mm reach, relying on the adjustable end cushions to prevent impact shock during rapid 30-800 mm/s transfers.
Palletizing Push-Off
Sweeps assembled pallets onto accumulation rollers where the 63 mm bore's 1402 N pull force retracts the mechanism within tight machine envelopes.
Is the Airtac SE63 Standard Cylinder SE63AX800S the Right Cylinder?
When sizing this actuator, compare its 1559 N push at 0.5 MPa against the 50 mm bore (982 N) if your load is lighter, or step up to the 80 mm bore (2513 N) for heavier displacement. Because this is a double-acting cylinder, it relies on continuous air pressure to move and will drift if air is lost or the valve is centered; if your application demands static holding without live pressure, consider the BSE rod-lock variant. For direct retrofits, the standardized ISO 15552 mounting interface allows direct replacement of comparable profile cylinders using existing FA, LB, or TC hardware.
At an 800 mm stroke, the unsupported length of the Ø20 mm piston rod introduces a risk of bending under side loads. To prevent premature rod-bearing wear, implement an external guide rail to carry the actual payload mass.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX800S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63AX800S is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprint and port dimensions (PT3/8) with other profile cylinders in this size class. The built-in magnet also works directly with AirTAC CMSE reed and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.