Airtac SE63 Standard Cylinder SE63AX90S
The AirTAC SE63 Standard Cylinder SE63AX90S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke90 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX90S
The AirTAC SE63AX90S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering 1559 N push at 0.5 MPa. It features a SUS420J2 stainless steel rod for corrosive or washdown environments, and includes a built-in magnet for CMSE and DMSE position sensing. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames.
Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting payloads from hard impacts at operating speeds up to 30-800 mm/s. With a 63 mm bore, PT3/8 port, and 90 mm stroke, it provides robust linear motion for demanding industrial automation.
Airtac SE63 Standard Cylinder SE63AX90S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX90S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX90S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX90S Is Used
Palletizer Flap Folding
Drives the folding mechanism on corrugated palletizing lines, using its 1559 N push to cleanly tuck heavy cardboard flaps before strapping.
Bottling Line Diverter
Actuates routing gates on beverage conveyors, where the SUS420J2 stainless rod withstands daily washdowns and the 90 mm stroke moves product between lanes.
CNC Lathe Chuck Guard
Opens and closes the safety interlock door on CNC turning centers, relying on the compact tie-rod-free profile to fit tight operator stations.
Is the Airtac SE63 Standard Cylinder SE63AX90S the Right Cylinder?
This 63 mm bore generates 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push; conversely, scaling up to the 80 mm bore provides 2513 N push. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve is centered—use a BSE rod lock or external pilot-operated check valve if the load must be held safely in place.
To replace an existing ISO 15552 cylinder, match the 63 mm bore, 90 mm stroke, PT3/8 port, and your required mounting accessory. The integrated -S magnet enables direct compatibility with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX90S FAQ
At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N push and 1402 N pull. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE63AX90S is dimensionally interchangeable per ISO 15552. You can swap it directly with other standard profile cylinders by matching the 63 mm bore, 90 mm stroke, PT3/8 port, and mounting dimensions, while utilizing the built-in magnet for CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.