Airtac SE63 Standard Cylinder SE63BX100
The AirTAC SE63 Standard Cylinder SE63BX100 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX100
The AirTAC SE63BX100 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 63 mm bore and 100 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for mid-weight industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves.
This specific configuration incorporates a SUS304 stainless steel piston rod (material code B) engineered for corrosive environments and washdown duty. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycles. Note that this SKU lacks a built-in magnet, meaning it is not equipped for CMSE or DMSE position sensing without modification.
Airtac SE63 Standard Cylinder SE63BX100 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX100 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX100
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX100 Is Used
Palletizer Case Pusher
Provides 1559 N of push at 0.5 MPa to index filled cartons onto pallets, leveraging the SUS304 rod to endure periodic washdowns in food packaging lines.
CNC Lathe Door Actuator
Shifts heavy machine tool safety doors across a 100 mm gap, utilizing the field-adjustable air cushions to prevent slamming at rapid 800 mm/s traverse speeds.
Pharmaceutical Skid Valve
Drives diverter mechanisms on process skids where the stainless steel rod withstands chemical splashes and the ISO 15552 body mounts flush to stainless framework.
Is the Airtac SE63 Standard Cylinder SE63BX100 the Right Cylinder?
Stepping down to a 50 mm bore reduces the 0.5 MPa push output to 982 N, whereas moving up to an 80 mm bore increases it to 2513 N, allowing you to scale thrust precisely to your load. Because this is a double-acting cylinder, it relies on continuous live air pressure to move and cannot hold a load if air is exhausted or a valve centers; for position holding, consider the BSE rod-lock variant. With a 100 mm stroke, side-load stress on the M16x1.5 rod thread and front bearing is minimal, though external guides remain best practice for rigid payloads.
For direct retrofits, this cylinder is dimensionally interchangeable per ISO 15552, sharing standard mounting footprints and PT3/8 port locations with equivalent profile cylinders. To match this exact unit, specify the 63 mm bore, 100 mm stroke, PT3/8 port, SUS304 stainless rod, and standard TPU seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX100 FAQ
At 0.5 MPa, the SE63BX100 delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum operating pressure is 1.0 MPa, yielding a maximum push force of 318 kgf.
Yes, the SE63BX100 is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards, meaning it shares identical mounting and port dimensions. However, note this specific SKU uses a SUS304 stainless steel rod and lacks a built-in position-sensing magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.