Airtac SE63 Standard Cylinder SE63BX1300S
The AirTAC SE63 Standard Cylinder SE63BX1300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke1300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX1300S
The AirTAC SE63BX1300S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, featuring a 63 mm bore and a 1300 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, extending to 2182 N at 0.7 MPa. Equipped with a SUS304 stainless steel rod, this unit is specifically configured for corrosive environments and washdown duty where standard carbon steel rods would fail.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that is highly resistant to corrosion and physical snagging. A built-in magnetic piston enables position detection with CMSE reed or DMSE electronic sensors. Because the 1300 mm stroke exceeds the standard catalog maximum of 1500 mm for this bore, it functions near the upper limit of standard capacity and is manufactured as a made-to-order item.
Airtac SE63 Standard Cylinder SE63BX1300S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX1300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX1300S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX1300S Is Used
Bottling Line Divert Gate
Actuates a high-speed divert arm on a stainless steel bottling line, utilizing the 1559 N push force and SUS304 rod to withstand frequent chemical washdowns without pitting.
Large Carton Flap Folding
Drives a 1300 mm folding mechanism for oversized corrugated cartons, relying on the adjustable pneumatic cushion to smoothly decelerate the long stroke without slamming.
Food Processing Oven Door
Opens and closes heavy insulated doors on a commercial food oven, where the field-adjustable cushion absorbs the substantial kinetic energy of the 63 mm bore at full extension.
Is the Airtac SE63 Standard Cylinder SE63BX1300S the Right Cylinder?
Selecting this 63 mm bore makes sense when you need substantial thrust but want to avoid the bulk of an 80 mm cylinder. If your application requires less force, stepping down to a 50 mm bore yields 982 N of push at 0.5 MPa. If you need more power, stepping up to an 80 mm bore provides 2513 N at 0.5 MPa. This model features a PT3/8 port and a 36 mm adjustable air cushion at both ends to tame end-of-stroke impacts.
At 1300 mm of stroke, the unsupported mass of the piston and rod introduces significant bending moments on the rod bearing; an external guide mechanism is strongly recommended to prevent premature seal wear and side-load failure. Note that the adjustable cushion only decelerates the piston near stroke end and does not hold the load—if air pressure is lost, the cylinder will drift, requiring a BSE rod lock for secure positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX1300S FAQ
At 0.5 MPa, this 63 mm cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE63BX1300S shares the exact ISO 15552 / VDMA 24562 mounting interface dimensions, making it a direct replacement for other ISO 15552 profile cylinders. You can retain your existing mounting hardware and use the PT3/8 ports and M16x1.5 rod thread without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX1300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.