Airtac SE63 Standard Cylinder SE63BX150S
The AirTAC SE63 Standard Cylinder SE63BX150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX150S
The AirTAC SE63BX150S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous duty. It features a 63 mm bore and a 150 mm stroke, delivering a robust 1559 N push force at 0.5 MPa. Equipped with a SUS304 stainless steel rod, this unit is purpose-built for corrosive environments and washdown applications where standard carbon steel would fail.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. A built-in magnet enables seamless integration with AirTAC CMSE reed and DMSE electronic position sensors, while the field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for moving loads.
Airtac SE63 Standard Cylinder SE63BX150S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX150S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX150S Is Used
Bottling Line Diverter
Utilizes the 1559 N push force and SUS304 rod to reliably deflect containers in high-moisture washdown environments without rusting.
Form-Fill-Seal Film Cut
Actuates sealing jaws over a 150 mm stroke, relying on the adjustable end cushions to soften impacts at high cycling speeds.
Pallet Stopper Gate
Leverages the ISO 15552 mounting interface to drop into existing conveyor frames, halting heavy pallets with 318 kgf maximum thrust.
Is the Airtac SE63 Standard Cylinder SE63BX150S the Right Cylinder?
Selecting this 63 mm bore yields 1559 N of push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore provides 982 N; conversely, moving up to the 80 mm bore grants 2513 N to handle heavier payloads. This model features a PT3/8 port and an M16x1.5 rod thread, paired with the SUS304 rod and -S magnet option.
Because this is a standard double-acting cylinder, it will not hold a load mechanically if air pressure drops or the valve centers—the piston will drift. For vertical loads requiring fail-safe holding, consider the BSE rod lock variant. Additionally, while the 150 mm stroke is well within standard limits, always verify side loading to prevent excessive rod-bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX150S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.
Yes, the SE63BX150S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware using the standard PT3/8 port and M16x1.5 rod thread. The built-in magnet also supports AirTAC CMSE and DMSE sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.