Airtac SE63 Standard Cylinder SE63BX150SH
The AirTAC SE63 Standard Cylinder SE63BX150SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX150SH
The AirTAC SE63BX150SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous environments. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, utilizing a 63 mm bore and 150 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this variant withstands corrosive washdowns and high temperatures up to 150 C, far exceeding the standard 70 C limit.
Its extruded aluminum barrel eliminates external tie rods, presenting a smooth, compact profile that resists debris buildup and mounts flush against machine frames. The integrated -S magnet enables direct fitment of CMSE reed or DMSE electronic position sensors along the three dedicated sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration, protecting payloads from hard mechanical impacts.
Airtac SE63 Standard Cylinder SE63BX150SH Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX150SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX150SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX150SH Is Used
Palletizer Film Wrap
With 1559 N of push force and a 150 mm stroke, this cylinder actuates the film cutting and clamping arms on high-speed palletizers, enduring washdown cleaning thanks to its SUS304 rod.
Lab Oven Door
The FKM Viton seals tolerate 150 C ambient heat, making it ideal for opening and closing insulated doors on industrial laboratory ovens without seal degradation.
CNC Chip Conveyor
Provides reliable 150 mm linear actuation to index chip conveyors away from CNC machining centers, utilizing its ISO 15552 footprint for seamless integration.
Is the Airtac SE63 Standard Cylinder SE63BX150SH the Right Cylinder?
When sizing this cylinder, compare its 1559 N push at 0.5 MPa against your actual load requirements. If you need less force, stepping down to the 50 mm bore yields 982 N of push force, while moving up to the 80 mm bore provides 2513 N for heavier payloads. Because this is a double-acting cylinder, it does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider an AirTAC BSE rod lock variant or an external pilot-operated check valve. To replace an existing cylinder, verify the 63 mm bore, 150 mm stroke, PT3/8 port, and required mounting accessory. The 150 mm stroke is below the 300 mm threshold, so standard rod bearing support is sufficient without needing an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX150SH FAQ
At 0.5 MPa, the SE63BX150SH generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum operating pressure is 1.0 MPa, yielding a maximum push force of 318 kgf.
Yes, it is dimensionally interchangeable with any ISO 15552 profile cylinder, sharing standard mounting interfaces and a PT3/8 port. The built-in magnet (-S) is specifically designed to accept AirTAC CMSE reed switches and DMSE electronic sensors for precise end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX150SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.