Airtac SE63 Standard Cylinder SE63BX150SN
The AirTAC SE63 Standard Cylinder SE63BX150SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX150SN
The AirTAC SE63BX150SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and 150 mm stroke. Configured with a SUS304 stainless steel rod and an NBR seal, this variant is specifically built to withstand corrosive and washdown conditions without compromising operational reliability.
The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames. Field-adjustable air cushions at both stroke ends allow technicians to fine-tune end-of-stroke deceleration, effectively absorbing kinetic energy to prevent hard mechanical impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63BX150SN Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX150SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX150SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX150SN Is Used
Bottling Rinser Actuation
Drives the lifting carriage on beverage bottling lines, utilizing the 1559 N push force to elevate full crates while the SUS304 rod resists caustic washdown chemicals.
Pallet Diverter Gate
Shifts diverting arms on packaging conveyors with a 150 mm stroke, relying on the NBR seal to maintain low-friction operation in humid distribution centers.
CNC Chuck Door Opener
Indexes the safety door on CNC machining centers, using the ISO 15552 mounting interface for seamless integration and adjustable cushions to soften door closure.
Is the Airtac SE63 Standard Cylinder SE63BX150SN the Right Cylinder?
When sizing this actuator, consider stepping down to a 50 mm bore if your application requires less than 982 N of push force at 0.5 MPa, or moving up to an 80 mm bore if you need to exceed the 2513 N push threshold. The integrated -S magnet supports AirTAC CMSE reed and DMSE electronic sensors, which seat directly into the barrel's three-sided sensor grooves for precise position detection. Because this is a double-acting cylinder, it relies on continuous air pressure to hold a load; if your process experiences pressure loss or requires mechanical locking, pair it with a BSE rod lock variant. Additionally, while the 20 mm rod handles standard loads, always verify side-load limits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX150SN FAQ
This 63 mm bore cylinder features a PT3/8 port and generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa.
Yes, the SE63BX150SN is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using existing mounting hardware and identical center distances.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX150SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.