Airtac SE63 Standard Cylinder SE63BX175S
The AirTAC SE63 Standard Cylinder SE63BX175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX175S
The AirTAC SE63BX175S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, making it well-suited for mid-weight industrial actuation. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without obstruction.
This specific configuration features a SUS304 stainless steel rod (code B) for superior resistance to corrosion and washdown chemicals, alongside a built-in magnet (code S) for non-contact position sensing. You can pair the magnet directly with AirTAC CMSE reed switches or DMSE solid-state electronic sensors to trigger machine logic at any point along the 175 mm travel.
Airtac SE63 Standard Cylinder SE63BX175S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX175S Is Used
Bottling Line Diverter
Leverages the 1559 N push force and SUS304 rod to reliably deflect plastic bottles on a washdown packaging conveyor.
CNC Lathe Door Actuator
Utilizes the 175 mm stroke and flush ISO 15552 profile to automate heavy machine tool safety doors in coolant environments.
Chemical Reagent Dispenser
Deploys the stainless steel rod and CMSE sensor magnet to meter precise fluid volumes in a corrosive laboratory setting.
Is the Airtac SE63 Standard Cylinder SE63BX175S the Right Cylinder?
At 0.5 MPa, this 63 mm bore produces 1559 N of push force. If your application requires less energy, stepping down to a 50 mm bore yields 982 N of push. Conversely, scaling up to an 80 mm bore provides 2513 N for heavier payloads. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or a valve centers; if your process demands strict position holding without live air, consider an AirTAC BSE rod-lock variant instead. The PT3/8 porting and ISO 15552 mounting interface ensure you can reuse existing foot, flange, or trunnion hardware during retrofits.
With a 175 mm stroke, the 20 mm diameter rod and M16x1.5 thread provide a robust interface, but long unsupported strokes invite rod-bearing bending under lateral loads. For maximum cylinder longevity, mount an external guide parallel to the actuator to absorb radial stress rather than letting the piston rod carry it.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX175S FAQ
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at the operating pressure limit of 1.0 MPa.
Yes. The SE63BX175S is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprint and center-to-center dimensions with other standard profile cylinders. It is not a tie-rod cylinder, making it lighter and more compact while retaining full mounting accessory compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.