Airtac SE63 Standard Cylinder SE63BX180S
The AirTAC SE63 Standard Cylinder SE63BX180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX180S
The AirTAC SE63BX180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding motion control. It delivers a robust 1559 N push force at 0.5 MPa and features a 180 mm stroke, making it well-suited for mid-tier industrial actuation. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration incorporates a SUS304 stainless steel rod (code B) for superior resistance in washdown or corrosive environments, and includes a built-in magnet (code S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, softening hard impacts during high-speed operations.
Airtac SE63 Standard Cylinder SE63BX180S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX180S Is Used
Bottling Line Diverter
Routes plastic containers on a high-speed beverage conveyor using the 180 mm stroke, leveraging the SUS304 rod to endure frequent washdown cycles without pitting.
Case Erector Flap Folding
Drives cardboard flaps on continuous-motion packaging machinery, utilizing the 1559 N push force to overcome carton stiffness while the adjustable cushion softens the retraction stop.
CNC Lathe Door Actuator
Opens and closes heavy machine tool safety doors, relying on the built-in magnet to trigger DMSE electronic sensors for interlock verification before the spindle starts.
Is the Airtac SE63 Standard Cylinder SE63BX180S the Right Cylinder?
Selecting this 63 mm bore cylinder makes sense when your application requires the 1559 N push force at 0.5 MPa. If your load demands less energy, stepping down to the 50 mm bore yields 982 N of push force, while moving up to the 80 mm bore provides 2513 N. Because the stroke is 180 mm, maintaining alignment is critical; long unsupported strokes induce rod-bearing bending, so utilizing an external guide is highly recommended to prevent premature seal wear.
For retrofitting, this unit is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 cylinders without altering mounting hardware. It uses a PT3/8 port and a 20 mm rod with an M16x1.5 thread. Keep in mind that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If the air supply is lost, the piston drifts, so applications requiring position holding without live pressure need a BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX180S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push rating of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63BX180s is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 profile cylinders. It shares the standardized mounting interface and utilizes a PT3/8 port, ensuring hardware compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.