Airtac SE63 Standard Cylinder SE63BX200
The AirTAC SE63 Standard Cylinder SE63BX200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX200
The AirTAC SE63BX200 is a double-acting ISO 15552 profile cylinder featuring a 63 mm bore and 200 mm stroke. It supplies a robust 1559 N push force at 0.5 MPa, making it well-suited for moderate-to-heavy industrial actuation. The SUS304 stainless steel piston rod provides superior corrosion resistance for washdown or humid environments, while the square extruded aluminum barrel eliminates external tie rods for a compact, flush-mount footprint.
Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. This specific SKU is configured without a sensor magnet, relying on physical travel rather than electronic position feedback.
Airtac SE63 Standard Cylinder SE63BX200 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX200
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX200 Is Used
Bottling Line Diverters
Actuates routing gates on beverage filling lines, utilizing the SUS304 rod to withstand daily chemical washdowns while delivering 1559 N to shift full bottle cases.
Corrugated Box Flap Folders
Drives mechanical arms to fold heavy cardboard flaps on automated carton sealers, where the 200 mm stroke provides the exact travel needed to clear varying box heights.
Metal Stamping Ejectors
Pushes formed sheet metal parts out of progressive stamping dies, relying on the adjustable end cushions to absorb kinetic energy during rapid 800 mm/s cycling.
Is the Airtac SE63 Standard Cylinder SE63BX200 the Right Cylinder?
Selecting the SE63BX200 is ideal when your application requires the 1559 N push force at 0.5 MPa alongside strict washdown capability. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, whereas moving up to the 80 mm bore provides 2513 N for heavier payloads. Because this is a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, matching the 63 mm port size of PT3/8 and standard mounting accessories without requiring custom brackets.
Keep in mind that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, so it cannot hold a vertical load safely without an external rod lock or pilot-operated check valve. Additionally, while the 20 mm rod and M16x1.5 thread handle high side loads well, any stroke of 200 mm or more with an unsupported load should incorporate an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX200 FAQ
At 0.5 MPa, the SE63BX200 delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa and speeds of 30-800 mm/s.
Yes, the SE63BX200 is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders using the same PT3/8 ports and standard mounting hardware. Note that this specific SKU lacks a sensor magnet, so it cannot host CMSE or DMSE position switches without modifying the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.