Airtac SE63 Standard Cylinder SE63BX200S
The AirTAC SE63 Standard Cylinder SE63BX200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX200S
The AirTAC SE63BX200S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. It delivers a robust 1559 N push force at 0.5 MPa and features a 200 mm stroke. Equipped with a SUS304 stainless steel rod, this variant is specifically designed to resist corrosion in washdown or chemically aggressive environments.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mounting body that simplifies sensor placement along its three integrated grooves. Because this unit includes a built-in magnet (code S), it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting payloads from harsh impacts.
Airtac SE63 Standard Cylinder SE63BX200S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX200S Is Used
Food Packaging Diverters
Leverages the SUS304 rod for washdown durability while supplying 1559 N push at 0.5 MPa to actuate heavy flighted conveyor diverts in food processing lines.
CNC Fixture Clamping
Uses the built-in magnet with DMSE sensors to confirm clamp stroke, applying up to 318 kgf of holding force to secure aluminum castings during machining.
Lab Washdown Stations
The corrosion-resistant stainless rod and adjustable pneumatic cushions safely decelerate 200 mm strokes when retracting sample racks from chemical spray booths.
Is the Airtac SE63 Standard Cylinder SE63BX200S the Right Cylinder?
This 63 mm bore strikes an excellent balance, but sizing is critical. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, if you need to move heavier loads, stepping up to the 80 mm bore provides 2513 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder relies on live air pressure to maintain position; it will drift if air is lost, so for critical hold-down duties, consider the BSE rod-lock variant.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing the exact 63 mm mounting footprint, PT3/8 port, and standard hardware of other ISO 15552 profile cylinders. At 200 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads well, though any long unsupported stroke benefits from an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX200S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push (extend) and 1402 N of pull (retract) force. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, sharing the exact mounting interface and PT3/8 port size of other profile cylinders. Because it carries the -S magnet code, it directly accepts AirTAC CMSE reed switches and DMSE electronic sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.