
The AirTAC SE63 Standard Cylinder SE63BX300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63BX300S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 300 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it highly effective for mid-weight automation tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush into tight machine layouts.
This specific configuration features a SUS304 stainless steel rod (option B) for superior resistance in washdown or corrosive settings, and includes a built-in magnet (option S) for direct mounting of CMSE reed or DMSE electronic position sensors. The field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63BX300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1559 N push force to reliably pull and form corrugated blanks on a packaging line, with the SUS304 rod enduring humid washdown environments.
The 300 mm stroke provides the reach to pivot diverter arms across a conveyor belt, while the adjustable cushion softens the stop at high speeds.
Moves test tube racks into processing stations, leveraging the corrosion-resistant stainless rod and DMSE electronic sensor feedback for precise positioning.
If your process requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513 N for heavier payloads. Because this is a 300 mm stroke, the unsupported piston rod is susceptible to bending under lateral loads; always utilize an external guide to prevent side-load damage to the rod bearing. Remember that this cylinder relies on live air pressure to move; if air is lost or the valve is centered, the piston will drift and cannot hold a load without an external rod lock or pilot-operated check valve. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware.
Quick checklist
The SE63BX300S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63BX300S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of other ISO 15552 profile cylinders. It features a PT3/8 port and a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.